VALVOLINE OIL TREATMENT 500ML Daha büyük görüntüle

VALVOLINE OIL TREATMENT 300ML

Yeni ürün

OIL TREATMENT

Valvoline Oil Treatment contains a polymer that increases the viscosity index of engine oil, making the oil more viscous (thicker) at high temperatures without increasing viscosity proportionally at low-temperatures.

Oil Treatment also contains an extreme-pressure additive that helps reduce engine wear.

Daha fazla bilgi

98 Öğeler

46,61 TL vergi dahil

Daha fazla bilgi

Valvoline™ Oil Treatment Oil Treatment increases oil viscosity at high temperatures, which helps reduce blow-by, noise and oil burning by helping piston rings form a better seal. Oil Treatment contains a special polymer that increases the viscosity index of engine oil, making the oil more viscous (thicker) at high temperatures without increasing viscosity proportionally at lowtemperatures. Applications Suitable for all diesel and gasoline engines. Especially suitable for older engines and engines with high mileage. Oil Treatment increases oil viscosity at high temperatures which helps reduce blow-by and oil burning by helping piston rings form a better seal. Excessive blow-by causes rapid oil oxidation which can lead to increased engine wear. Oil Treatment also contains an extreme pressure additive which helps reduce engine wear. Features and Benefits Excellent protection for worn engines Smoking, low compression, blow-by, noise and oil burning are all symptoms of worn engines. Oil Treatment helps alleviate all these symptoms. Oil Treatment contains a polymer which increases the viscosity index of engine oil. Improving the viscosity index of engine oil means making the oil more viscous (thicker) at high temperatures without increasing viscosity proportionally at low temperatures. Oil Treatment also reduces friction in engine. Excellent viscosity protection Engine oil fortified with Oil Treatment still becomes less viscous (thinner) as temperature increases and more viscous (thicker) as temperature decreases, but at a slower rate than non-treated engine oil. Minimizes oil consumption Oil Treatment increases oil viscosity at high temperatures, which helps reduce blow-by, noise and oil burning by helping piston rings form a better seal. Easy to use: With a warm engine at idle speed, add entire contents of Oil Treatment into crankcase oil. Do not exceed crankcase capacity. For continuous benefits, add Oil Treatment with every oil change. One bottle is enough for a standard passenger car oil sump. Extreme-pressure engine wear protection. Oil Treatment also contains an extreme-pressure additive that helps reduce engine wear. Deposit control Oil Treatment provides a better seal between piston rings and cylinder wall. With that improving the compression and decreasing the oil consumption and pollution of the exhaust system. P

 

Health and Safety This product is not likely to present any significant health or safety hazards when used correctly in the right application. A Material and Safety Data Sheet (MSDS) is available on request via your local sales office or via the internet @ http://msds.ashland.com Protect the Environment Take used chemicals to an authorized collection point. Do not discharge into drains, soil or water. Typical Properties Typical property characteristics are based on current production. Whilst future production will conform to Valvoline specifications, variations in these characteristics may occur. Oil Treatment Appearance Clear liquid Colour Clear amber Specific Gravity @ 15°C. 0.877 Storage Cool & dry

Değerlendirmeler

Bir değerlendirme yazın

VALVOLINE OIL TREATMENT 300ML

VALVOLINE OIL TREATMENT 300ML

OIL TREATMENT

Valvoline Oil Treatment contains a polymer that increases the viscosity index of engine oil, making the oil more viscous (thicker) at high temperatures without increasing viscosity proportionally at low-temperatures.

Oil Treatment also contains an extreme-pressure additive that helps reduce engine wear.

aynı kategoride bulunan diğer 30 ürün: