Valvoline™ SynPower MST FE C6 0W-20

wer™ MST FE C6 0W20

VALVOLINE SynPower – OEM Approved Premium Grade Synthetic Motor Oil. Formulated for ultimate performance and protection under all operating conditions, SynPower is designed to fulfil the latest standards of leading engine manufacturers.

Approvals & Specifications

Dexos D (DD25BADB103) Ford WSS-M2C952-A1 Jaguar Land Rover STJLR 03.5006 MB-Approval 229.71 Opel/Vauxhall OV 040 1547–A20 ACEA C6, C5 API SP, SN PLUS ILSAC GF-6A Recommended for use where Fiat 9.55535- DM1 is specified

Applications SynPower MST FE C6 0W-20 has been formulated to meet Ford WSS-M2C952-A1 lubricant specification. MST FE C6 is designed to maintain fuel efficiency in light duty vehicles with advanced aftertreatment systems such as DPF’s, GPF’s and SCR, where a 0W-20 is recommended. Also suitable for other vehicles where a 0W-20 ACEA C6 or C5 engine oil may be used. Always check the owner’s manual for the correct oil specification to use.

Features & Benefits Approvals & Specifications Dexos D (DD25BADB103) Ford WSS-M2C952-A1 Jaguar Land Rover STJLR 03.5006 MB-Approval 229.71 Opel/Vauxhall OV 040 1547–A20 ACEA C6, C5 API SP, SN PLUS ILSAC GF-6A Recommended for use where Fiat 9.55535- DM1 is specified Ultimate protection and performance SynPower engine oil is formulated with the highest quality base oils and latest additives to ensure ultimate protection and performance under all operating conditions. Designed to fulfill the latest standards of leading engine manufacturers. Excellent cold start performance Instant oil flow at low temperatures provides easy cold starts and optimal lubrication within seconds after ignition. Engine cleanliness Keeps engine extremely clean by minimizing deposits. Fuel Efficiency (FE) Low viscosity and special additives result in maximum reduction of friction which results in a lower fuel consumption. Wear protection Provides ultimate protection against wear under all operating conditions. Mid SAPS Technology (MST) Valvoline’s MST additive system is formulated to provide the highest level of engine protection whilst not adversely impacting the performance of emissions control technologies such as Diesel Particulate Filters (DPF), Gasoline Particulate Filters (GPF) and Selective Catalytic Reduction (SCR) systems. Formulated with advanced detergent and anti-wear components the MST additive system minimizes filter blocking, catalyst deactivation and sulphate particulate creation; helping to maintain the efficient operation of the vehicle.

SynPower MST FE C6 Motor Oil SAE Viscosity Grade 0W-20 Viscosity, mm2 /s @ 100 ºC. ASTM D-445 8,3 Viscosity, mm2 /s @ 40 ºC. ASTM D-445 41 Viscosity Index ASTM D-2270 186 Viscosity, mPa.s –35°C. ASTM D-5293 <6200 TBN, mg KOH/g ASTM D-2896 9,5 Pour Point, ºC ASTM D-5949 -42 Specific Gravity @ 15.6°C. ASTM D-4052 0,843 Flash Point, COC, ºC. ASTM D-92 226