Yeni ürün
>> For use in all limited-slip, hypoid and other gears where API GL-5 type lubricant is specified
>> Special additives reduces noise in differentials
>> Protects against wear under all conditions
Performance Levels/ Approvals
API GL-5 LS
100 Öğe Öğeler
Dikkat: Stoktaki son ürünler!
Stoka gireceği tarih:
VALVOLINE LS Gear Oil GL-5 SAE 75W90
>> For use in all limited-slip, hypoid and other gears where API GL-5 type lubricant is specified
>> Special additives reduces noise in differentials
>> Protects against wear under all conditions
Performance Levels/ Approvals
API GL-5 LS
Alıcı :
* Gerekli alanlar
veya İptal
>> For use in all limited-slip, hypoid and other gears where API GL-5 type lubricant is specified
>> Special additives reduces noise in differentials
>> Protects against wear under all conditions
Performance Levels/ Approvals
API GL-5 LS
DuraBlend™ Gear Oil GL-5 LS SAE 75W-90 Premium synthetic blend gear oil for Limited Slip Axles of passenger cars, trucks and buses. Extreme Pressure gear oil suitable for differentials when the manufacturer specifies a GL-5 LS gear oil. Valvoline DuraBlend Gear Oil GL-5 LS is recommended for virtually all limited slip differentials where an SAE 75W-90 hypoid oil with adjusted slip properties is required. The product provides excellent protection and lubrication of the limited slip differential over a wide temperature range. Approvals/Performance levels SAE 75W-90 API GL-5 Features and Benefits Excellent protection Excellent protection against wear and tear, also under high stress working conditions. Advanced additives Excellent additives protect against corrosion, oxidation, foaming, and deposits. Breakdown resistance Synthetic blend base oils and a highly balanced additive system avoid breakdowns even after longtime use. Applications Suitable for limited slip differentials of passenger cars, vans, trucks, and buses where the manufacturer recommends a GL-5 LS transmission oil with a viscosity of SAE 75W90. Limited Slip differentials are often mounted on 4WD vehicles where limited slip is necessary for driving in rough terrain. The product is also suitable for trucks and buses with LS axles, and even construction equipment where such oils are prescribed in axles and final drives. Consistent, stable viscosity Excellent viscosity-temperature properties even at low temperatures. Highly stable viscosity with long long-term multigrade advantages. Limited slip properties Base oils and additives provide excellent limited slip properties resulting in suppressing noises that can occur in limited slip axles. Product Information A PRODUCT OF ASHLAND CONSUMER MARKETS, A COMMERCIAL UNIT OF ASHLAND INC. Page 2 of 2 Health and Safety This product is not likely to present any significant health or safety hazards when used correctly in the right application. A Material and Safety Data Sheet (MSDS) is available on request via your local sales office or via the internet @ http://msds.ashland.com Protect the Environment Take used oil to an authorized collection point. Do not discharge into drains, soil or water. Typical Properties Typical property characteristics are based on current production. Whilst future production will conform to Valvoline™ specifications, variations in these characteristics may occur. DuraBlend Gear Oil GL-5 LS SAE Viscosity Grade 75W-90 Viscosity, mm2 /s @ 100 ºC. ASTM D-445 16.0 Viscosity, mm2 /s @ 100 ºC. After shearing(CEC: L-45-T93). Stay-in-grade Viscosity, mm2 /s @ 40 ºC. ASTM D-445 110 Viscosity Index ASTM D-2270 156 Viscosity, mPa.s –40°C. ASTM D-2983 <150.000 TAN, mg KOH/g ASTM D-664 2.3 Pour Point, ºC ASTM D-5950 -45 Specific Gravity @ 15.6°C. ASTM D-4052 0.874 Flash Point, COC, ºC. ASTM D-92 158