Yeni ürün
45 Öğe Öğeler
Dikkat: Stoktaki son ürünler!
Stoka gireceği tarih:
ENEOS PREMIUM MULTI GEAR 80W90 1L
Alıcı :
* Gerekli alanlar
veya İptal
ENEOS Super Multi Gear 80W90
Gear Oil for Hypoid Gears and Hub reductions
ENEOS Super Multi Gear 80W90 is a mineral gear oil formulated using the latest sulphur-phosphorus technology. This additive technology assures an excellent protection of the gears against metal-to-metal contact under the most severe conditions, even under shock-loads. This Oil contains special additives leaving a protective film upon the surfaces to prevent corrosion and wear. Due to its adjusted viscometrics these oils can be applied in cold conditions (see pour point). This Oil is recommended for use in bevel, spiral bevel and hypoid gear type differentials (either single or double reduction) and in power dividers where API GL-5, MIL-L 2105D and Mack GO-G is specified.
● SPECIAL FEATURES
1. Superior oxidation and thermal stability
This Oil shows a superior oxidation and thermal stability and has a good resistance against foaming. Even at higher temperatures an effective lubricating film thickness assures proper lubrication.
2. Excellent Resistance for Wear, Corrosion, Foaming and Oxidation
This Oil shows an excellent resistance against wear, corrosion and foaming as well as oxidation and ageing at elevated temperatures.
● PERFORMANCE LEVEL
API GL-5
MIL-L-2105-D
Mack GO-G
ZF TE-ML 05A,12A
MAN 342 N / MAN 342 type M-1
● APPLICATION
Recommended for use in bevel, spiral bevel and hypoid gear type differentials (either single or double reduction) and in power dividers where API GL-5, MIL-L 2104D and Mack GO-G is specified.
● CONTAINERS
1L, 4L, 20L, 200L Drum, 1000L IBC
● TYPICAL PROPERTIES
SAE viscosity grade
80W-90
Density (20°C), g/cm3
0.895
Flash point (COC), °C
207
Kinematic viscosity (40°C), mm2/s
133
(100°C), mm2/s
14.2
Viscosity index
105
Pour point, °C
–30.0